Skip to main content

Connect an iFactory printer

This guide will walk you through the process of connecting your iFactory3D printer with LutraCAD software for seamless 3D printing operations.

Prerequisites​

Before you begin, ensure you have:

  • An iFactory3D printer
  • LutraCAD software installed on your computer
  • Both printer and computer connected to the same network

Step 1: Locate Printer IP Address​

On your iFactory3D printer:

  1. Navigate to the Home screen
  2. Select "Settings"
  3. Go to "Info"
  4. Locate the IP Address
IP Address Format

The IP address should look like: 192.168.178.65

  • Do not include any ports
  • Do not add http:// or https://
  • Make sure to note down the exact address

Step 2: Configure LutraCAD​

  1. Launch LutraCAD software
  2. Navigate to: Account > Settings > 3D Printer > Network Printers
  3. Click on "Add printer manually" button
  4. In the printer selection dialog, choose your iFactory3D model from the dropdown list
  5. Enter the printer IP Address you noted earlier
  6. Click "Select" to initiate the connection
  7. Fill in desired printer name
  8. Click on "Save" to complete the setup

Step 3: Verify Connection​

When successfully connected, LutraCAD will be able to:

  • Upload files directly to the printer
Troubleshooting

If you cannot establish a connection:

  • Verify both devices are on the same network
  • Check if the IP address is correct
  • Ensure your firewall isn't blocking the connection
  • Restart both the printer and LutraCAD if needed